Support
Details
Wireless range extender TP-LINK TL-WA850RE is designed to increase the range and signal strength of an existing wireless network to eliminate dead zones. The device is compliant with N standard (speeds up to 300 Mbps). Due to small dimensions and integration with AC plug, it can be plugged into any AC outlet in a room. Thanks the Ethernet port, the extender can also be used as a WiFi card for any device equipped with Ethernet interface.
Main features:
- Range Extender mode extends wireless network connectivity - especially useful in dead zones and places without wired network
- Small dimensions and integration with AC plug allow placement of the device in the required place, directly in any AC outlet
- Ethernet port ensures connection with other devices with Ethernet interface
The extender is equipped with five LEDs signaling the level of the received wireless signal, which helps to determine the appropriate location for the unit to achieve maximum coverage and capacity of the wireless network. To obtain high-performance connections it is recommended to place the device in a place where at least 3 LEDs are lit.
Specifications
Name | TP-LINK TL-WA850RE |
Code | N2946 |
Buttons | RE (Range Extender), Reset |
Wireless standards | IEEE 802.11n, IEEE 802.11g, IEEE 802.11b |
Frequency range | 2.4-2.4835 GHz |
Transmission speeds (dynamically) | 11n: up to 300 Mbps |
EIRP | <20 dBm |
Rx sensitivity | 270M: -68dBm@10% PER 130M: -68dBm@10% PER 108M: -68dBm@10% PER 54M: -68dBm@10% PER 11M: -85dBm@8% PER 6M: -88dBm@10% PER 1M: -90dBm@8% PER |
Wireless operation mode | Range Extender |
Security | 64/128/152-bit WEP, WPA-PSK / WPA2-PSK |
Dimensions | 110.0 x 65.8 x 75 mm |
Operating temperature | 0℃...40℃ |
Power | 100-240 VAC |
Specifications
Name | TP-LINK TL-WA850RE 300Mbps wireless network amplifier | ||
Model | TL-WA850RE | ||
Product type | Indoor access point | ||
Operating frequency | GHz | 2,4 | |
Manufacturer | TP-Link | ||
Interfaces | |||
Ethernet ports | 10/100 Mbps | 1 | |
Wireless transmission | |||
standard | WiFi 4 802.11n – 2,4 GHz | ||
Operating mode | Client, Amplifier | ||
Transmission power | dBm | 20 | |
MIMO | 2 × 2 | ||
Transmission rate | 2.4 GHz | MBps | 300 |
Sensitivity | 2.4 GHz | dBm | 270M: -70dBm@10% PER, 130M: -70dBm@10% PER, 108M: -73dBm@10% PER, 54M: -75dBm@10% PER, 11M: -86dBm@8% PER, 6M: -92dBm@10% PER, 1M: -94dBm@8% PER |
Protection | WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP),64/128/152-bit encryption WEP | ||
Software and hardware properties | |||
Enclosure IP rating | IP40 | ||
Management | www | ||
Device properties | |||
Max. power consumption | W | 3,12 | |
Power supply | voltage | VAC | 100...240 |
Dimensions | mm | 110 × 66 × 76 | |
Mounting | For outlets | ||
Certificates | CE/FCC | ||
Package content | Manual, Access point | ||
Operating environment | |||
Temperature | operation | ℃ | 0...40 |
storage | ℃ | -40...+70 | |
Humidity | air | % | 10...90 |
storage | % | 5...90 |