EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
Support
Details
- integration with any IP monitoring system,
- remote viewing of images via Internet Explorer from any place in the world,
- remote management of cameras via Internet Explorer from any place in the world,
- connecting with any access point (IEEE802.11b, WEP),
- connecting via UTP cable (radio switched off)
- analog video signal on BNC output, parallel to IP interface,
- remote recording of images/sound on the computer (via Internet Explorer),
- remote viewing of images via VLC or Quick Time Player,
- capturing viewed images (as JPEG or BMP) and saving them on computer any moment (via Internet Explorer),
- viewing of images from 4 PiXORD cameras (this camera + 3 other cameras from among: K1130 P300, K1131 P400, K1132 P400W, K1136 P428, K1236 P463DW, K2131 P1401) - on the camera's www site,
- videoconferencing via Internet Explorer, thanks to embedded software (there is needed second Pixord camera or video server: K1130 P300, K1131 P400, K1132 P400W, K1136 P428, K1236 P463DW, or K2131 P1401),
- posting live video from the camera on any website (the source code for pasting in is available at download),
- performing programmed actions after motion detection and/or activation of alarm input:
- sending short AVI files to an ftp server,
- sending short AVI files as e-mail attachment,
- activation of alarm output,
- using PT device controlled via RS485 or RS 232 port (protocols: Lilin, PELCO-D, PELCO-P, DynaColor),
- outdoor operation - after placing the camera in outdoor housing - Marathon MH-816/12 M5407.
- 12VDC input (power)
- RJ45 connector - network interface
- two SMA connectors - for connecting antennas (to order: SMA R/P)
- mini DIN - for connecting special cable extension with additional connectors:
- BNC - analog video output (for monitor, DVR etc.)
- RS485 (terminal strip) - for PT device
- alarm input (terminal strip)
- alarm output (terminal strip)
In each video format the user can set compression level which influences image quality and bandwidth requirements. Additionally, in MPEG-4 format it is possible to choose CBR or VBR option and change advanced Group of Picture (GOP) settings. The MPEG-4 streaming uses RTSP protocol.
- advanced image settings:
- advanced compression options:
- MPEG-4:
- bitrate options:
- Constant Bitrate (CBR) - from 64kbps to 4Mbps (influences quality of image),
- Variable Bitrate (VBR) - choice among four quality levels (actual bitrate depends on variability of the scene and the chosen quality level),
- automatic adjustment of bitrate in case of network limitations (it protects the captured video against improper decompression),
- choice of frame sequence (I-Frame and P-Frame in GOP),
- GOP size,
- bitrate limit (for VBR option),
- MJPEG:
- choice among four quality levels,
- audio settings:
- on/off
- PCM (48k, 8k) or MP2 compression,
- PTZ settings:
- interface (RS485, RS232),
- standard settings of RS485/RS232 interface,
- protocol (Lilin, PELCO-D, PELCO-P, DynaColor),
- choice and configuration of additional sources of video (for viewing of images from 4 PiXORD cameras on the camera's website),
- insertion of OSD information,
- assignment of IP address from DHCP server or insertion of static parameters (IP address, subnetwork mask, default gateway, DNS server),
- change of standard ports (camera management, MJPEG, sound: port 80 - http) and MPEG-4 (port 554 - RTSP),
- configuration of wireless interface (on/off, ESSID, network search, WEP settings),
- DynDNS settings,
- remote information on camera (firmware version, MAC address),
- restoring default settings,
- synchronization of date and time with NTP server or computer,
- defining access rights (administrator, or user - viewing only),
- remote update of firmware,
- reaction to events (motion detection, external alarm),
- defining motion detection area and parameters,
- assigning FTP server for sending short AVI files,
- assigning e-mail address for sending e-mails with AVI attachments,
- remote restart.
- resolution, frame rate, interlaced/non-interlaced, TV standard (PAL, NTSC, SECAM), contrast, brightness, color, rotation, automatic electronic shutter, backlight compensation,
- AC/DC adapter: 100-240VAC, 50Hz or 60Hz / 12VDC, 1.5A
- Ethernet patch cable
- two omnidirectional antennas with SMA connectors
- wall bracket
- cable adapter: mini DIN / BNC(video) and terminal strip (RS485, alarm in, alarm out)
- Allan wrench
- mount accessories
- quick installation guide
- user's manual
- IPInstaller utility - for searching IP PiXORD cameras in the network
- PiXORD Component Installer - for integration of PiXORD plugins with Internet Explorer
- instructions for PiXORD Component Installer
- DirectX
- XviD codec
- QuickTime player
- Adobe Flash Player plugin for Internet Explorer
- managing utility - IP monitoring system IP P6032 (OEM)
| Hardware information | |
| System | CPU 32-bit RISC |
| ROM 4MB Flash | |
| RAM 32MB SDRAM | |
| Watchdog | |
| Inputs/outputs | LED x2 (Network. Power/System Status) |
| RJ-45 (Ethernet 10/100 Base-T) | |
| DC input (iris control) | |
| 12V DC power input | |
| Mini DIN (RS485. RS232. GPIO. video output) | |
| 2 x SMA connectors (antennas) | |
| Built-in microphone | |
| Image sensor | 1/4" CCD. 540TVL. 1 lx |
| Lens | 6 mm; F1.8 |
| Video | |
| Compression | MPEG-4 SP. JPEG/MJPEG |
| Settings | AWB: auto |
| AGC | |
| Electronic shutter: ON/OFF | |
| Resolution | Full D1 (720 x 576). VGA. CIF. QVGA. QCIF. QQVGA |
| Network data | |
| Interface | Ethernet (10/100 Base-T) |
| Protocols | TCP/UDP/IP. ICMP. HTTP. FTP. SMTP. |
| Transmission | Max. transfer rate: 4Mbps |
| Working conditions | |
| Working temperature | 5ºC to 50ºC |
| Humidity range | 20 - 80 % |
| Supplying voltage | 12 V DC |
| Power consumption | <8 W |
| Physical specs | |
| Dimensions (LxWxH) | 135 x 85 x 40 mm |
| Weight | 570 g |
| Features | |
| Functions | Remote recording with simultaneous live viewing |
| Image rotation | |
| Full screen mode | |
| DDNS support | |
| PPPoE support | |
| NTP support | |
| Alarm management | Triggering: motion detection |
| Response: information on the event | |
| Installation | IP Installer for finding network devices |
| Firmware updating | Via web |
| Client requirements | Pentium 4 2.0 |
| 512 MB RAM | |
| Windows: 98se/Me/2000/XP | |
| Latest service packs | |
| Latest drivers | |
| DirectX 9.0c or later | |
| Internet Explorer 6.0 or later | |
| Macromedia Flash 6 | |
| XviD MPEG-4 codec | |
| Security | Multilayer access control |
| Video recording | Directly via web browser |
| With included free software pack | |
![CAT 5e FTP Shielded Cable: NETSET BOX F/UTP 5e [305 m], indoor](https://www.dipolnet.cz/img/thumbnails/e1515_305+.jpg/38b1eca8e5019a9912871f4792ea3eb6.jpg)